• 
  Japan Sodick Mirror EDM

  Arc-less Plus: The new EDM system "Arc-less Plus" is equipped as standard. It can greatly reduce processing time and cost and reduce human error. Furthermore, by standard installation of the "SVC circuit" that can realize high-quality finished surfaces, high-quality dark or mirror surfaces can be obtained in a short time.

• 
  Three-axis control vertical machining center VPIUS-550

  International advanced standard machine tool structure, fully supported optimized design, and high-strength resin sand castings with strict aging treatment ensure high rigidity, minimal deformation and stable precision of the machine tool. The X, Y, Z guide rails of the machine tool are made of rectangular quenched cast iron, and cooperate with the wellhead production and plastic-coated sliding pair, which has good rigidity and vibration absorption;

• 
  Three-axis control vertical machining center DMG-NVD400DCG

  Performance characteristics of NV4000DCG high-precision machining center:
  
  1. Increase the stroke by 1.540|760|660mm (X|Y|Z)
  2. Advanced numerical control system, high-precision positioning and thermal displacement configuration
  3. X, Y, Z axis adopts straight line direct measurement system
  4. Coolant cooler (independent) and oil cooler (independent) to ensure high precision and high dynamic performance
  5. All machine axes adopt DCG (center of gravity drive).
  6. All machine tool axes use hard guide rails to achieve outstanding stability and buffering performance
  7. This technology minimizes the vibration of the tool tip and achieves the highest surface quality of the machined surface.
  

• 
  Wire EDM M50A

  Ultra-precision, low-loss, high-efficiency, high-precision, user-friendly operating system. The world's automatic threading device; pitch processing accuracy ±1um; wire diameter using range Φ0.05-0.3mm; processing large inclination up to 45º; adapt to the diverse needs from simple cavity to complex shape precision machining, using guide rails and screws double positioning,

• 
  High Speed Fine Hole EDM HS-3545

  Features of High Speed Fine Hole EDM HS-3545:
  ◆ Intelligent knife lift function
  ◆ Simple man-machine dialogue operation
  ◆ Porous CAD automatic hole generation
  ◆ Composed of industrial-grade standardized modules, stable and durable
  ◆ A variety of material expert databases, which can be operated without experience
  ◆ AC servo drive, high efficiency, low noise, high precision
  

• 
  Art EDM-M50F MFG

  M50F MFG Features:
  1. Advanced conversational editing system
  2. EDM parameter memory and storage processing experience value
  3. Multiple trimming programs can be edited in the same single section
  4. The parameter conditions of EDM are replaced by E code, saving editing time
  5. The three-axis adopts high-performance servo motor, which has high sensitivity and good discharge effect.
  6. Equivalent energy discharge waveform design, and new graphite discharge circuit, high processing efficiency
  

• 
  Machining center machine tool YCM-C65A

  The processing stroke is 800*500mm, the accuracy is 1 wire, and the linear accuracy is measured. At the same time, a strict circular test is carried out on the geometric accuracy of the machine; this test can ensure the squareness of the trihedron and the accuracy of processing.

• 
  Machining Center Machine Tool MCV-720

  Structure and performance characteristics: The machine bed, worktable, column, milling head, etc. are all cast with resin sand. After secondary aging treatment, the machine tool has long-term high rigidity and high stability. The surface of the main guide rail adopts sliding guide rail pair, and the guide rail pair adopts surface sticking or quenching process. The machine tool is equipped with an automatic lubrication system and a forced lubrication pump to ensure sufficient lubrication of the machine tool guide rail, ball display rod pair, and milling head components.

• 
  DOPHEN Vertical Precision Milling Machine TOM-3HG

  The X, Y, Z direction of the worktable has three types: manual feed, motorized feed and motorized fast-forward, and the feed speed can meet different processing requirements; fast-feed can make the workpiece reach the processing position quickly, which is convenient, fast, and shortened. non-processing time.
  The lubricating device can forcibly lubricate the vertical, horizontal and vertical screws and guide rails to reduce the wear of the machine tool and ensure the efficient operation of the machine tool; at the same time, the cooling system can adjust the nozzle to change the coolant flow to meet different processing needs.
  

• 
  Lathe C6312A1

  Structural Features:
  The bed is wider than ordinary lathes, and has high rigidity. The guide rail surface is quenched by medium frequency, which is durable.
  The operation of the machine tool is flexible and centralized, and the slide plate is equipped with a quick-moving mechanism. Using a single handle to visualize the operation, the pleasantness is good.
  The structural rigidity and transmission rigidity of the machine tool are higher than those of ordinary lathes, and the power utilization rate is high, which is suitable for powerful high-speed cutting. The main shaft has a large bore diameter and a complete range of optional accessories.